Double Combination Wardrobe - Linen Press
Note: Further information in More details below.
No hanging rails included. Hanging rails and fittings can be purchased separately in bedroom storage category. Ideal for DIY fitted wardrobes.
Our Blum high quality drawer boxes are available as either standard Metabox drawers or soft close Antaro drawer boxes and runners.
Standard facia height 1495mm.
Choose which option you require for the wardrobe sides. The gable end sides can go down to the floor with an integral flush to facia plinth and 4 adjustable feet (base supplied loose to allow feet adjustment). Alternatively the sides can stop at the base with no plinth included. In this case you will need to purchase plinth separately. This allows for a continuous run of plinth across all wardrobes. Note that you also need to purchase end panels if the wardrobes do not go up to the wall. Note that the wardrobe height includes the height of the 100mm plinth or the 100mm legs.
18mm Egger board construction with 18mm solid back panel. Supplied flat packed.
Using profile edged bedroom unit tops as cornice
Profiled edge bedroom unit tops can be supplied in the Apex and Bella vinyl ranges with the profiled edge of the top matching the profiled edge of the doors being used. These can be used as cornice on tall bedroom units by inverting the top so the profile is on the underside. These tops are all made to measure. For rectangular profiled tops, see Bella bedroom unit tops or Apex bedroom unit tops. Radius, angled, round, shaped and corner tops are also available, please contact us to order these on 0845 017 6480.Note: Minimum custom depth when drawers are fitted is 480mm and 480mm deep units with drawers have no service void. Units containing drawers can include a 20mm service void for scribing to wall where the unit depth is a minimum of 500mm. This can be selected using a custom depth setting for units 480mm deep as standard.
Codes: crobe8, crobe9, crobe10 Note: Pull-outs, wirework, doors and drawer fronts are not included with the unit - please purchase separately.
Further information is available in the pdf specification sheet.
You can buy a sample rigid unit carcass here.