Current price: £167.94

4 easy steps: Please complete the four easy steps below to obtain a price for your kitchen unit carcass.

enlarge

Documentation

"L" Shaped Corner Base Unit Specifications

View This Category

Step 1 - Choose carcass finish

Alabaster U104

Step 2 - Carcass size

Depth:
560 mm

Custom Height:

Height:

Need help?

Unit handing:

*Note: Height does not include legs (where applicable).

Step 3 - Door and Drawer sizes

Please see the description section for sizes of doors and drawer fronts to be purchased separately, if required.

All of our units up to 1000mm door height are drilled as standard 100mm from top and 100mm from bottom (as measured from the door edges). All units with doors over 1000mm tall will have 3 hinge drilling locations with a hole in the centre. All units with doors over 1700mm tall will have 4 hinge locations with 2 centre drillings. Top hung units are drilled 100mm in from the left and 100mm in from the right. If you need any more help please get in touch.

Step 4 - Hinges and fittings

Unit hinge drilling:

Door hinges:

Dummy drawer plates, required when using dummy drawer with working door on L shaped corner unit:

Unit finish:

Unit height:

Unit width:

Unit depth:

Unit handing:

Extra Information:

Enter any special instrucions.

Quantity:

Product Description

Corner Kitchen Base Unit 'L' Shape

Door sizes and hinge requirements for highline. For custom heights, adjust door heights accordingly.

The list of door sizes and hinge requirements below is for bi-fold hinge sets which have 2 x 180 degree hinges to mount one of the doors plus 2 Bi-fold hinges to join doors together. A bi-folding set is hinged either on the left hand side or the right hand side and both doors are joined together so that they open together.

If you require the doors to open separately, without using a bi-fold set, then you will need 4 x 180 degree hinges for hinging both doors, no bi-fold hinges and a 30mm x 30mm corner filler, available from our accessories categories. For this arrangement, both doors must be reduced in width by 10mm from the stated bi-fold door dimensions below. LH & RH drilling will be required.

Unit	Doors required (Highline)	Hinges required
900 x 900	2 x Door 715mm high x 316mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.
900 x 1000	1 x Door 715mm high x 316mm wide 1 x Door 715mm high x 416mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.
900 x 1100	1 x Door 715mm high x 316mm wide 1 x Door 715mm highx 516mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.
1000 x 1000	2 x Door 715mm high x 416mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.
1000 x 1100	1 x Door 715mm high x 416mm wide 1 x Door 715mm high x 516mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.
1100 x 1100	2 x Door 715mm high x 516mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.

Doors required for dummy drawerline (requires 2 sets of dummy drawer plates to join dummy drawer fronts to doors). For custom heights, adjust door heights accordingly.

Unit	Doors required (dummy drawerline)	Hinges required
900 x 900	2 x Drawer front 140mm high x 316mm wide 2 x Door 570mm high x 316mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.
900 x 1000	1 x Drawer front 140mm high x 316mm wide 1 x Drawer front 140mm high x 416mm wide 1 x Door 570mm high x 316mm wide 1 x Door 570mm high x 416mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.
900 x 1100	1 x Drawer front 140mm high x 316mm wide 1 x Drawer front 140mm high x 516mm wide 1 x Door 570mm high x 316mm wide 1 x Door 570mm highx 516mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.
1000 x 1000	2 x Drawer front 140mm high x 416mm wide 2 x Door 570mm high x 416mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.
1000 x 1100	1 x Drawer front 140mm high x 416mm wide 1 x Drawer front 140mm high x 516mm wide 1 x Door 570mm high x 416mm wide 1 x Door 570mm high x 516mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.
1100 x 1100	2 x Drawer front 140mm high x 516mm wide 2 x Door 570mm high x 516mm wide	2 x 180 degree hinges plus 2 Bi-fold hinges to join doors together.

For non-standard sizes, please call us.

Note: Doors and drawer fronts are not included with the unit - please purchase separately.

Further details or images - click to enlarge

'L' shape corner base unit carcass - no doors or drawer fronts

Unit as supplied - no doors or drawer fronts included

Explore unit in 3D
(pdf file)

Codes: 90LBH, 910LBH, 911LBH, 100LBH, 101LBH, 111LBH

Further information is available in the pdf specification sheet.

You can buy a sample rigid unit carcass here.