Standard Height Double Drawerline Bedroom Unit

Description
Features

Double drawerline standard height bedroom unit, 760mm high.

Note: Pull-outs, wirework, doors and drawer fronts are for illustration only and are not included with the unit - please purchase separately. Drawer boxes and any internal drawer fronts are included.

fast delivery - 2 to 3 Weeks delivery.2 to 3 Weeks delivery. (details)
Minimum order applies (details)
Codes: SHD8, SHD10
From £195.17 inc. VAT* See Features for more

High quality drawer boxes are used in this drawerline bedroom unit and are available as either standard Blum Metabox drawers or Hettich soft close drawer boxes and runners.

One adjustable shelf is included.

18mm Egger board construction with 18mm solid back panel.

Bedroom unit tops

Profiled edge bedroom unit tops can be supplied in the Apex and Bella vinyl ranges with the profiled edge of the top matching the profiled edge of the doors being used. These tops are all made to measure. For rectangular profiled tops, see Bella bedroom unit tops . Radius, angled, round, shaped and corner tops are also available, please contact us to order these on 0330 135 9090.

Square edged tops can be supplied in the Zurfiz range by selecting the required door and ordering as a custom size. Note that, as standard, any grain will run up and down the height of the door so ensure grain direction is correctly specified for the bedroom unit top. Zurfiz bedroom doors for use as tops

Square edged tops can be provided in the PVC edged ranges using the fully edged end panel. PVC edged bedroom unit tops

Normal practice is to add 20mm to the depth of the carcass so that the top overlaps the door/drawer front at the front edge and then to add any extra width, if required, for a lip at the side of the unit. Back edges would normally be square with any profiling being on front or front and sides as required.

Panels can also be used as cornice on top of tall units where profiled panels would be inverted so that the profile is on the underside.

Standard Height Drawerline Bedroom Units Hettich
Please complete the options below to obtain a price or buy
Choose carcass finish
Choose Finish:
39
Choose
Alabaster U104
Carcass size
*Note: Height includes 100mm plinth or 100mm leg height.
Door and Drawer sizes - for information only
Select unit size and then the sizes of doors and drawer fronts to be
purchased separately (if required) will be shown here.
All of our units up to 1000mm door height are drilled as standard 100mm from top and 100mm from bottom (as measured from the door edges) except for units with cabinet height 290mm or less. These are drilled 80mm from top and 80mm from bottom (as measured from door edges). All units with doors over 1000mm tall will have 3 hinge drilling locations with a hole in the centre. All units with doors over 1700mm tall will have 4 hinge locations with 2 centre drillings. Top hung units are drilled 100mm in from the left and 100mm in from the right. If you need any more help please get in touch.
Select hinge drilling
Other options
Select type of drawer box
Select hinges and fittings
Any special requirements
Enter any special instructions.
Select quantity and add to basket
£195.17Sale! £216.85

Further information is available in the pdf specification sheet in the features tab at the top of the page.

Current price: Sale!
£216.85
£195.17
Stuck? Give us a call! 0330 135 9090
Blum, Kessehohmer, Egger, Gravity, Unique, Bella, Zurfiz,  Pronto,  PWS
Animated product going into shopping basket