Angled Wardrobe Unit

Includes one shelf either fixed 400mm down for single hanging, fixed central for double hanging or supplied loose (choose option required).

No hanging rails included. Hanging rails and fittings can be purchased separately in bedroom storage category. Ideal for DIY fitted wardrobes.

Choose which option you require for the wardrobe sides. The gable end sides can go down to the floor with an integral flush to facia plinth and 4 adjustable feet (base supplied loose to allow feet adjustment). Alternatively the sides can stop at the base with no plinth included. In this case you will need to purchase plinth separately. This allows for a continuous run of plinth across all wardrobes. Note that you also need to purchase end panels if the wardrobes do not go up to the wall. Note that the wardrobe height includes the height of the 100mm plinth or the 100mm legs.

Two widths available to take 296 or 396mm wide doors.

Standard door size 2155mm h x 296mm w.
Unit width 277mm.

Standard door size 2155mm h x 396mm w.
Unit width 365mm.

Standard long side depth 590mm.
Standard short side depth 450mm.

Adjust door size accordingly for custom height units.

Note: Hinges can only be fitted on the short side of the unit. Select the appropriate hinges based on the unit width.

18mm Egger board construction with 18mm solid back panel. Supplied flat packed.

Using profile edged bedroom unit tops as cornice

Profiled edge bedroom unit tops can be supplied in the Apex and Bella vinyl ranges with the profiled edge of the top matching the profiled edge of the doors being used. These can be used as cornice on tall bedroom units by inverting the top so the profile is on the underside. These tops are all made to measure. For rectangular profiled tops, see Bella bedroom unit tops . Radius, angled, round, shaped and corner tops are also available, please contact us to order these on 0330 135 9090.