Double Stable Wardrobe


Double width stable wardrobe unit with shelf. Includes one shelf either fixed 400mm down for single hanging, fixed central for double hanging or supplied loose (choose option required).

Note: Due to the size of these products, they will be supplied flat-pack. You will require a professional tradesman to assemble these products. We do not supply assembly instructions with these products but they are simple to assemble to a professional tradesman.

Note: Pull-outs, wirework, doors and drawer fronts are for illustration only and are not included with the unit - please purchase separately. Drawer boxes and any internal drawer fronts are included.

fast delivery - 2 to 3 Weeks delivery.2 to 3 Weeks delivery. (details)
Minimum order applies (details)
From £216.53 inc. VAT* See Features for more

No hanging rails included. Hanging rails and fittings can be purchased separately in bedroom storage category. Ideal for DIY fitted wardrobes.

Stable side: 500/600w blank at bottom. For standard blank height (720mm), 1435h x 496/596w door at top.

Full height side: 2155h x 500/600w door.

Choose which option you require for the wardrobe sides. The gable end sides can go down to the floor with an integral flush to facia plinth and 4 adjustable feet (base supplied loose to allow feet adjustment). Alternatively the sides can stop at the base with no plinth included. In this case you will need to purchase 100mm high plinth separately. This allows for a continuous run of plinth across all wardrobes. Note that you also need to purchase end panels if the wardrobes do not go up to the wall. Note that the wardrobe height includes the height of the 100mm plinth or the 100mm legs.

Standard facia height 2155mm.

18mm Egger board construction with 18mm solid back panel. Supplied flat packed.


Using profile edged bedroom unit tops as cornice

Profiled edge bedroom unit tops can be supplied in the Apex and Bella vinyl ranges with the profiled edge of the top matching the profiled edge of the doors being used. These can be used as cornice on tall bedroom units by inverting the top so the profile is on the underside. These tops are all made to measure. For rectangular profiled tops, see Bella bedroom unit tops . Radius, angled, round, shaped and corner tops are also available, please contact us to order these on 0330 135 9090.

Bedroom Stable Wardrobes
Please complete the options below to obtain a price or buy
Choose carcass finish
Choose Finish:
Alabaster U104
Carcass size
*Note: Height includes 100mm plinth or 100mm leg height.
Available either with sides to floor with plinth or as sides to base, no plinth
Door and Drawer sizes - for information only
Select unit size and then the sizes of doors and drawer fronts to be
purchased separately (if required) will be shown here.
All of our units up to 1000mm door height are drilled as standard 100mm from top and 100mm from bottom (as measured from the door edges) except for units with cabinet height 290mm or less. These are drilled 80mm from top and 80mm from bottom (as measured from door edges). All units with doors over 1000mm tall will have 3 hinge drilling locations with a hole in the centre. All units with doors over 1700mm tall will have 4 hinge locations with 2 centre drillings. Top hung units are drilled 100mm in from the left and 100mm in from the right. If you need any more help please get in touch.
Select hinge drilling
Other options
As standard, blank height will be adjacent unit height plus 60mm (top and clearance) minus 100mm (blank starts above plinth). E.g. 720mm for 760mm high adjacent units.
Select hinges and fittings
Any special requirements
Enter any special instructions.
Select quantity and add to basket
£216.53Sale! £240.59

Further information is available in the pdf specification sheet in the features tab at the top of the page.

Current price: Sale!
Stuck? Give us a call! 0330 135 9090
Blum, Kessehohmer, Egger, Gravity, Unique, Bella, Zurfiz,  Pronto,  PWS
Animated product going into shopping basket