Base Units Wall Units Storage Units Oven/Microwave Housings Fridge Freezer Housings Dressers & Tambour Units Plinths & Panels

Highline Base Units Drawerline Base Units Drawer Packs Corner Base Units Angled & Curved Base Units Wine & Bottle Base Units

Angled Kitchen Base Storage Units - Highline

10%
SALE

ENDS
30th SEP

Description

Features

Angled front kitchen base storage unit for pull-out storage wirework.
20mm service void.

Note: Pull-outs, wirework, doors and drawer fronts are for illustration only and are not included with the unit - please purchase separately. Drawer boxes and any internal drawer fronts are included.

2 to 3 Weeks delivery. (details)

Minimum order applies (details)

Codes: 25ABHP, 37ABHP

From £107.78 inc. VAT* See Features for more

This angled base unit requires the following door and drawer fronts:
Highline
250mm wide takes Door 715mm high x 296mm wide.
370mm wide takes Door 715mm high x 396mm wide.

Dummy Drawerline
250mm wide takes Drawer front 140mm high x 296mm wide and Door 570mm high x 296mm wide.
370mm wide takes Drawer front 140mm high x 396mm wide and Door 570mm high x 396mm wide.

For custom heights, adjust door height accordingly.

Full side is 560mm deep as standard and reduced side is 360mm deep. for custom depth, both sides will reduce by the same amount.

Note: Doors can only be hinged on the short side.

250mm wide units require a special hinge for 45° angled doors. 370mm wide units require a special hinge for 30° angled doors. The appropriate hinges should be selected from the options above.

Highline Base Unit Specifications

Order Sample Free Swatches

Kitchen Measuring Guide Contact Us

Please complete the options below to obtain a price or buy

Choose carcass finish

Choose Finish:

ChooseAlabaster U104

Carcass size

Custom Depth:

Depth:

Custom Height:

Height:

Unit handing:

*Note: Height does not include legs (where applicable).

Door and Drawer sizes - for information only

Select unit size and then the sizes of doors and drawer fronts to be
purchased separately (if required) will be shown here.

All of our units up to 1000mm door height are drilled as standard 100mm from top and 100mm from bottom (as measured from the door edges) except for units with cabinet height 290mm or less. These are drilled 80mm from top and 80mm from bottom (as measured from door edges). All units with doors over 1000mm tall will have 3 hinge drilling locations with a hole in the centre. All units with doors over 1700mm tall will have 4 hinge locations with 2 centre drillings. Top hung units are drilled 100mm in from the left and 100mm in from the right. If you need any more help please get in touch.

Select doors and/or storage - EasyQuote

Select hinge drilling

Unit hinge drilling:

Select hinges and fittings

Door hinges (info):

Soft close option

Dummy drawer clips, required when using dummy drawer with working door (info):

Any special requirements

Extra Information:

Enter any special instructions.

Unit finish:

Unit height:

Unit width:

Unit depth:

unit_doors:

Doors selected with unit

Soft close:

unit_storage:

Storage component selected with unit

Select quantity and add to basket

EasyQuote

Back to EasyQuote

Use this button to return to EasyQuote.

Quantity:

£107.78Sale! £119.76

Further information is available in the pdf specification sheet in the features tab at the top of the page.

Current price: Sale!
£119.76£107.78

Stuck? Give us a call! 0330 135 9090