Base Units Wall Units Storage Units Oven/Microwave Housings Fridge Freezer Housings Dressers & Tambour Units Plinths & Panels

Highline Base Units Drawerline Base Units Drawer Packs Corner Base Units Angled & Curved Base Units Wine & Bottle Base Units

Corner Carousel Base Unit - 2 Separate Doors

15%
SALE

ENDS
18th DEC

Description

Features

Corner carousel base unit with indvidually opening doors.
20mm service void.

Note: These products are supplied pre-assembled (with leg sockets but without legs). These are large products and you will need to make sure that you have enough access space for these to be delivered into your property or space of storage.

Note: Pull-outs, wirework, doors and drawer fronts are for illustration only and are not included with the unit - please purchase separately. Drawer boxes and any internal drawer fronts are included.

2 to 3 Weeks delivery. (details)

Minimum order applies (details)

Code: LBHC2SD range

From £194.33 inc. VAT* See Features for more

Door sizes and hinge requirements for highline. This version of the unit is for doors that open separately, without using a bi-fold set. You will need a total of 4 x 170 degree hinges for hinging both doors and a 30mm x 30mm corner filler, available from our accessories categories. Note that for this arrangement, both doors have been reduced in width by 10mm comapred to the equivalent bi-fold unit. LH & RH drilling will be required.

Unit	Doors required (Highline)	Hinges required
900 x 900	2 x Door 715mm high x 306mm wide	4 x 170 degree hinges.
900 x 1000	1 x Door 715mm high x 306mm wide 1 x Door 715mm high x 406mm wide	4 x 170 degree hinges.
900 x 1100	1 x Door 715mm high x 306mm wide 1 x Door 715mm highx 506mm wide	4 x 170 degree hinges.
1000 x 1100	1 x Door 715mm high x 406mm wide 1 x Door 715mm high x 506mm wide	4 x 170 degree hinges plus.
1100 x 1100	2 x Door 715mm high x 506mm wide	4 x 170 degree hinges.

Doors required for dummy drawerline (requires 2 sets of dummy drawer plates to join dummy drawer fronts to doors). For custom heights, adjust door heights accordingly.

Unit	Doors required (dummy drawerline)	Hinges required
900 x 900	2 x Drawer front 140mm high x 306mm wide 2 x Door 570mm high x 306mm wide	4 x 170 degree hinges.
900 x 1000	1 x Drawer front 140mm high x 306mm wide 1 x Drawer front 140mm high x 406mm wide 1 x Door 570mm high x 306mm wide 1 x Door 570mm high x 406mm wide	4 x 170 degree hinges.
900 x 1100	1 x Drawer front 140mm high x 306mm wide 1 x Drawer front 140mm high x 506mm wide 1 x Door 570mm high x 306mm wide 1 x Door 570mm highx 506mm wide	4 x 170 degree hinges.
1000 x 1000	2 x Drawer front 140mm high x 406mm wide 2 x Door 570mm high x 406mm wide	4 x 170 degree hinges.
1000 x 1100	1 x Drawer front 140mm high x 406mm wide 1 x Drawer front 140mm high x 506mm wide 1 x Door 570mm high x 406mm wide 1 x Door 570mm high x 506mm wide	4 x 170 degree hinges.
1100 x 1100	4 x Drawer front 140mm high x 506mm wide 2 x Door 570mm high x 506mm wide	4 x 170 degree hinges.

For non-standard sizes, please call us.

"L" Shaped Corner Base Unit Specifications

Order Sample Free Swatches

Kitchen Measuring Guide Contact Us

Please complete the options below to obtain a price or buy

Choose carcass finish

Choose Finish:

ChooseAlabaster U104

Standard or True Handleless cabinet

Need help?

Cabinet Style:

Select True Handleless to have the unit gables routed or panels set back/slotted for True Handleless rails and doors. True handleless is available in standard heights only.

Carcass size

Depth:

560 mm

Custom Height:

Height:

Unit handing:

*Note: Height does not include legs (where applicable).

Door and Drawer sizes - for information only

Select unit size and then the sizes of doors and drawer fronts to be
purchased separately (if required) will be shown here.

All of our units up to 1000mm door height are drilled as standard 100mm from top and 100mm from bottom (as measured from the door edges). All units with doors over 1000mm tall will have 3 hinge drilling locations with a hole in the centre. All units with doors over 1700mm tall will have 4 hinge locations with 2 centre drillings. Top hung units are drilled 100mm in from the left and 100mm in from the right. If you need any more help please get in touch.

Select doors and/or storage - EasyQuote

Select hinge drilling

Unit hinge drilling:

Select hinges and fittings

Door hinges (info):

Soft close option

Dummy drawer plates, required when using dummy drawer with working door on L shaped or diagonal corner unit:

Any special requirements

Extra Information:

Enter any special instructions.

Unit finish:

Unit height:

Unit width:

Unit depth:

unit_storage:

Storage component selected with unit

unit_doors:

Doors selected with unit

Soft close:

Select quantity and add to basket

EasyQuote

Back to EasyQuote

Use this button to return to EasyQuote.

Quantity:

£194.33Sale! £228.62

Further information is available in the pdf specification sheet in the features tab at the top of the page.

Current price: Sale!
£228.62£194.33

Stuck? Give us a call! 0330 135 9090