0845 017 6480 / 0121 788 2810
/ OPENING HOURS MON−FRI: 8.30AM−5PM
EASYQUOTE

Corner Kitchen Base Units Diagonal

Description
Features
Diagonal corner base unit for highline or dummy drawerline. Various widths available.

Note: Pull-outs, wirework, doors and drawer fronts are for illustration only and are not included with the unit - please purchase separately.

Codes: 90dbh, 93dbh, 100dbh, 100dbh2
From £157.15 inc. VAT* See Features for more

Door sizes and hinge requirements for highline. For custom heights, adjust door heights accordingly.

Unit Doors required (Highline) Hinges required
900 x 900 1 x Door 715mm high x446mm wide 2 x 45° angle hinges. Specify LH or RH drilling.
930 x 930 1 x Door 715mm high x 496mm wide 2 x 45° angle hinges. Specify LH or RH drilling..
1000 x 1000 1 x Door 715mm high x596mm wide 2 x 45° angle hinges. Specify LH or RH drilling.
1000 x 1000 2 door 2 x Door 715mm high x 296mm wide 4 x 45° angle hinges. 2 to mount each door. Requires LH & RH drilling. This variant has a centre post.

Doors required for dummy drawerline (requires 2 sets of dummy drawer clips to retain dummy drawer fronts in carcass). For custom heights, adjust door heights accordingly.

Unit Doors required (Dummy Drawerline) Hinges required
900 x 900 1 x Drawer front 140mm high x 446mm wide
1 x Door 570mm high x446mm wide
2 x 45° angle hinges. Specify LH or RH drilling.
930 x 930 1 x Drawer front 140mm high x 496mm wide
1 x Door 570mm high x 496mm wide
2 x 45° angle hinges. Specify LH or RH drilling..
1000 x 1000 1 x Drawer front 140mm high x 596mm wide
1 x Door 570mm high x596mm wide
2 x 45° angle hinges. Specify LH or RH drilling.
1000 x 1000 2 door 2 x Drawer front 140mm high x 296mm wide
2 x Door 570mm high x 296mm wide
4 x 45° angle hinges. 2 to mount each door. Requires LH & RH drilling. This variant has a centre post.

For non-standard sizes, please call us.

Highline Base Unit Specifications
Please complete the options below to obtain a price or buy
Choose carcass finish
Finish:
Choose
Alabaster U104
Carcass size
Need help?
*Note: Height does not include legs (where applicable).
Door and Drawer sizes - for information only
Select unit size and then the sizes of doors and drawer fronts to be
purchased separately (if required) will be shown here.
All of our units up to 1000mm door height are drilled as standard 100mm from top and 100mm from bottom (as measured from the door edges). All units with doors over 1000mm tall will have 3 hinge drilling locations with a hole in the centre. All units with doors over 1700mm tall will have 4 hinge locations with 2 centre drillings. Top hung units are drilled 100mm in from the left and 100mm in from the right. If you need any more help please get in touch.
Select doors and/or storage - EasyQuote
Select hinge drilling
Select hinges and fittings
Any special requirements
Enter any special instructions.
Doors selected with unit
Select quantity and add to basket
EasyQuote
Back to EasyQuote
Use this button to return to EasyQuote.
£157.15Sale! £174.62

Further information is available in the pdf specification sheet in the features tab at the top of the page.

Current price: Sale!
£174.62
£157.15
Stuck? Give us a call! 0845 017 6480 or 0121 788 2810
Blum, Kessehohmer, Egger, Gravity, Unique, Bella, Zurfiz,  Pronto, Multiwood, Second Nature
Animated product going into shopping basket