0845 017 6480 / 0121 788 2810
/ OPENING HOURS MON−FRI: 8.30AM−5PM
EASYQUOTE

Kitchen 'L' Shape Base Unit - Flat Pack

Kitchen 'L' Shape Base Unit - Flat Pack
Kitchen 'L' Shape Base Unit - Flat Pack
Description
Features
A flat pack kitchen cabinet 'L' shape corner base unit. The unit is drilled for highline only (drilled both left and right). Any drilling required for short doors must be done on site.
Code: FP90LBH
From £78.73 inc. VAT* See Features for more
A flat pack kitchen cabinet 'L' shape corner base unit. The unit is drilled for highline only (drilled both left and right). Any drilling required for short doors must be done on site.

Door sizes and hinge requirements for highline.

The list of door sizes and hinge requirements below is for bi-fold hinge sets which have 2 x 170 degree hinges to mount one of the doors plus 2 Bi-fold hinges to join doors together. A bi-folding set is hinged either on the left hand side or the right hand side and both doors are joined together so that they open together. Soft close buffers are available for the 170 degree hinges but not for the bi-fold hinges.

If you require the doors to open separately, without using a bi-fold set, then you will need 4 x 170 degree hinges for hinging both doors, no bi-fold hinges and a 30mm x 30mm corner filler, available from our accessories categories. For this arrangement, both doors must be reduced in width by 10mm from the stated bi-fold door dimensions below.

Unit Doors required (Highline) Hinges required
900 x 900 2 x Door 715mm high x 316mm wide 2 x 170 degree hinges plus 2 Bi-fold hinges to join doors together.

Doors required for dummy drawerline (requires 2 sets of dummy drawer plates to join dummy drawer fronts to doors). Hinge holes will need to be drilled on site.

Unit Doors required (dummy drawerline) Hinges required
900 x 900 2 x Drawer front 140mm high x 316mm wide
2 x Door 570mm high x 316mm wide
2 x 170 degree hinges plus 2 Bi-fold hinges to join doors together.

All of our Finsactiva flat pack kitchen units are manufactured to the highest standards using a cam and dowel construction and made from FINSA high density chipboard, PVC edged all round. These kitchen cupboards are available in a choice of finishes.

Flat Pack Corner L Base Specifications
Please complete the options below to obtain a price or buy
Choose carcass finish
Finish:
Choose
FP White
Carcass size
Need help?
 
*Note: Height does not include legs (where applicable).
Door and Drawer sizes - for information only
Please see the description section for sizes of doors and drawer fronts to be purchased separately, if required.
We recommend the following when choosing doors to suit our Finsactiva flat pack units:
All doors up to 1000mm high should have 2 hinge drilling locations at 100mm centres. All doors over a 1000mm high up to 1700mm will require 3 hinge drilling locations with a hole in the centre. All doors over 1700mm high will require 4 hinge drilling locations with 2 centre drillings. Top hung doors should be drilled 100mm in from the left and 100mm in from the right. If you need anymore help please get in touch.
Select hinges and fittings
Select quantity and add to basket
EasyQuote
Back to EasyQuote
Use this button to return to EasyQuote.
£78.73

Further information is available in the pdf specification sheet in the features tab at the top of the page.

Current price: £78.73
Stuck? Give us a call! 0845 017 6480 or 0121 788 2810
Blum, Kessehohmer, Egger, Gravity, Unique, Bella, Zurfiz,  Pronto, Multiwood, Second Nature
Animated product going into shopping basket